The STI 1/4" x 1/16" (4 pcs.) is a Single Tube Insert RPM, RPM 20-230 functions as an accessroy for The Heart-Lung Machine HL 20, which is a modular system to drive, control and Monitor extracorporeal circulation. A heart lung machine is used in different surgical and non-surgical specialties. Cardiac surgical procedures requiring cardiopulmonary bypass comprise the vast majority of applications. However, there are some very special procedures that may require a heart-lung machine for extracorporeal bypass support. During these procedures the HL 20 adopts the blood pumping function of the heart while a disposable oxygenator takes over the gas exchange functionalities of the lung.

The STI 1/2" x 1/16" (4 pcs) is a Single Tube Insert RPM, RPM 20-230 functions as an accessroy for The Heart-Lung Machine HL 20, which is a modular system to drive, control and Monitor extracorporeal circulation. A heart lung machine is used in different surgical and non-surgical specialties. Cardiac surgical procedures requiring cardiopulmonary bypass comprise the vast majority of applications. However, there are some very special procedures that may require a heart-lung machine for extracorporeal bypass support. During these procedures the HL 20 adopts the blood pumping function of the heart while a disposable oxygenator takes over the gas exchange functionalities of the lung.

The DTI 1/4"x1/16" (2 pcs) is a Double Tube Insert RPM, RPM 20-230 functions as an accessroy for The Heart-Lung Machine HL 20, which is a modular system to drive, control and Monitor extracorporeal circulation. A heart lung machine is used in different surgical and non-surgical specialties. Cardiac surgical procedures requiring cardiopulmonary bypass comprise the vast majority of applications. However, there are some very special procedures that may require a heart-lung machine for extracorporeal bypass support. During these procedures the HL 20 adopts the blood pumping function of the heart while a disposable oxygenator takes over the gas exchange functionalities of the lung.

Level Sensor Pads LSP 20-531, non-sterile, box of 100 pieces

Wall holder for ambulance. Mandatory for ambulance transportation.

Cardio Help Base Unit

Flow-/bubble sensor for 3/8“ x 3/32“ tubing, length 0.9 m. This bubble sensor is an accessory for CARDIOHELP System as a miniaturized and light medical perfusion system. The general function of the CARDIOHELP System is to drive, to control, to monitor and to protocol the extra corporeal circulation (ECC). The CARDIOHELP System acts as a drive unit for a disposable tubing set including at least pump and oxygenator. This system is designed for inter- and intra-hospital transportation (transportation (limitations may apply for individual disposables).

CARDIOHELP Emergency Drive

CARDIOHELP Emergency Drive Holder for mast

Cardiohelp-i

The Venous Probe is to measure SO2, Hb, HCT and venous temperature as an accessory for CARDIOHELP. The CARDIOHELP System is a miniaturized and light medical perfusion system. The general function of the CARDIOHELP System is to drive, to control, to monitor and to protocol the extra corporeal circulation (ECC). The CARDIOHELP System acts as a drive unit for a disposable tubing set including at least pump and oxygenator.

The CLS is a device to monitor blood or saline level in a reservoir and to generate an electrical signal if the level falls below a predetermined value.

CARDIOHELP Emergency Drive Holder for rail

CARDIOHELP Holder for mast

Base plate Holder HKH 8850. Ground Plate for Helicopter. An accessory of CARDIOHELP System.

CARDIOHELP-i mobile holder.The CARDIOHELP-i Mobile Holder is for connection to the CARDIOHELP Base Plate or CARDIOHELP Wall Holder incl. CARDIOHELP mobile holderCARDIOHELP protection cover

Gas bottle holder for helicopter.

CARDIOHELP Country Kit EnglUS

MAQUET CARDIOHELP Bubble Sensor BS 3/8x3/32 L1.7

MAQUET CARDIOHELP Bubble Sensor BS 3/8x1/16-1/4x3/32 L1.7

CARDIOHELP Emergency Drive

The CARDIOHELP System is a blood oxygenation and carbon dioxide removal system used to pump blood through the extracorporeal bypass circuit forcirculatory and/or pulmonary support for periods appropriate to cardiopulmonary bypass (up to six hours). It is also intended to provide circulatory and/or pulmonary support during procedures not requiring cardiopulmonary bypass (for periods up to six hours).The CARDIOHELP System in configuration with the HLS/HIT Set Advanced is intended to be used within the hospital environment and outside the hospitalenvironment (for periods up to six hours), e.g. for intra- and inter-Hospital transport.The CARDIOHELP System in configuration with the QUADROX-iR is intended to be used in extracorporeal circulation during cardiopulmonary bypass in cardiac surgery (for periods for up to six hours).

CARDIOHELP mobile holder model HKH 8860. The CARDIOHELP Mobile Holder is for connecting the CARDIOHELP Base Plate or CARDIOHELP Wall Holder incl. CARDIOHELP protection cover.

Quantum Pump Control Module

Quantum Roller Pump - 8 inch

Quantum Roller Pump - 4 inch

Quantum Roller Pump - 6 inch

Quantum Power Supply

Quantum Smart Occluder - Left hand

Quantum Pump Frame 1 - Blackpool

Quantum Pump Frame 2 - Cheltenham

Quantum Pump Frame 3 - Vienna

Quantum Pump Frame 4 - New York

Quantum Flow Sensor - ID 3/16" x Wall 1/16" (OD 5/16") 2.0m

Quantum Flow Sensor - ID 1/4" x Wall 1/16" (OD 3/8") 2.0m

Quantum Flow Sensor - ID 1/4" x Wall 3/32" (OD 7/16") 2.0m

Quantum Flow Sensor - ID 3/8" x Wall 3/32" (OD 9/16") 2.0m

Quantum Flow Sensor - ID 1/2" x Wall 3/32" (OD 11/16") 2.0m

Quantum Smart Occluder - Right Hand