Maquet Cardiopulmonary AG 70107.1881 MAQUET CARDIOHELP

CARDIOHELP Country Kit EnglUS

Flow-/bubble sensor for 3/8“ x 3/32“ tubing, length 0.9 m. This bubble sensor is an accessory for CARDIOHELP System as a miniaturized and light medical perfusion system. The general function of the CARDIOHELP System is to drive, to control, to monitor and to protocol the extra corporeal circulation (ECC). The CARDIOHELP System acts as a drive unit for a disposable tubing set including at least pump and oxygenator. This system is designed for inter- and intra-hospital transportation (transportation (limitations may apply for individual disposables).

Base plate Holder HKH 8850. Ground Plate for Helicopter. An accessory of CARDIOHELP System.

The CARDIOHELP System is a blood oxygenation and carbon dioxide removal system used to pump blood through the extracorporeal bypass circuit forcirculatory and/or pulmonary support for periods appropriate to cardiopulmonary bypass (up to six hours). It is also intended to provide circulatory and/or pulmonary support during procedures not requiring cardiopulmonary bypass (for periods up to six hours).The CARDIOHELP System in configuration with the HLS/HIT Set Advanced is intended to be used within the hospital environment and outside the hospitalenvironment (for periods up to six hours), e.g. for intra- and inter-Hospital transport.The CARDIOHELP System in configuration with the QUADROX-iR is intended to be used in extracorporeal circulation during cardiopulmonary bypass in cardiac surgery (for periods for up to six hours).

SET INCLUDES: - 4100 DRIVER, DUAL-TRIGGER - 4100-125 PIN COLLET - 4100-62 WIRE COLLET - 4103-126 PIN COLLET - 4100-131 JACOBS DRILL - 4100-132 JACOBS DRILL 5/32" - 4103-435 4:1 HUDSON/MODIFIED TRINKLE - 4100-110 SYNTHES DRILL - 4103-110 SYNTHES DRILL -4103-210 SYNTHES REAMER -4103-231 REAMER 1/4" - 4100-400 SAGITTAL SAW - 4100-451 STERILIZATION CONTAINER

CARDIOHELP Emergency Drive

MAQUET CARDIOHELP Bubble Sensor BS 3/8x3/32 L1.7

MAQUET CARDIOHELP Bubble Sensor BS 3/8x1/16-1/4x3/32 L1.7

Cardiohelp-i

The Venous Probe is to measure SO2, Hb, HCT and venous temperature as an accessory for CARDIOHELP. The CARDIOHELP System is a miniaturized and light medical perfusion system. The general function of the CARDIOHELP System is to drive, to control, to monitor and to protocol the extra corporeal circulation (ECC). The CARDIOHELP System acts as a drive unit for a disposable tubing set including at least pump and oxygenator.

CARDIOHELP Country Kit EnglUS

Flow-/bubble sensor for 3/8“ x 3/32“ tubing, length 0.9 m. This bubble sensor is an accessory for CARDIOHELP System as a miniaturized and light medical perfusion system. The general function of the CARDIOHELP System is to drive, to control, to monitor and to protocol the extra corporeal circulation (ECC). The CARDIOHELP System acts as a drive unit for a disposable tubing set including at least pump and oxygenator. This system is designed for inter- and intra-hospital transportation (transportation (limitations may apply for individual disposables).

Base plate Holder HKH 8850. Ground Plate for Helicopter. An accessory of CARDIOHELP System.

The CARDIOHELP System is a blood oxygenation and carbon dioxide removal system used to pump blood through the extracorporeal bypass circuit forcirculatory and/or pulmonary support for periods appropriate to cardiopulmonary bypass (up to six hours). It is also intended to provide circulatory and/or pulmonary support during procedures not requiring cardiopulmonary bypass (for periods up to six hours).The CARDIOHELP System in configuration with the HLS/HIT Set Advanced is intended to be used within the hospital environment and outside the hospitalenvironment (for periods up to six hours), e.g. for intra- and inter-Hospital transport.The CARDIOHELP System in configuration with the QUADROX-iR is intended to be used in extracorporeal circulation during cardiopulmonary bypass in cardiac surgery (for periods for up to six hours).