Base, for Sarns™ Modular Perfusion System 8000

Lamp Long 33"

The 33" gooseneck, 20 watt lamp is intended to be mounted on any of the system poles

The 15" gooseneck, 20 watt lamp is intended to be mounted on any of the system poles

System base using a 100V-120V, 15A (circuit breaker), 50/60 Hz (20A power source required) power source

System base using a 220V-240V, 7A (circuit breaker), 50/60 Hz (10A power source required) power source

The flowmeter module provides the interface between the flow sensor and the system. The module processes the signals necessary to compute fluid flow values. Those flow values are then communicated to the system. Flowmeter values are displayed on the CCM and, if assigned, on a pump's local display.

Central Control Monitor (CCM) combines an embedded computer, a touch screen, and a Graphical User Interface (GUI) to provide a centralized display of system information and onscreen control of all system devices.

The Air Bubble Detect (ABD) module is the interface between an air sensor and the system. The ABD module monitors the air sensor and communicates any alarms to the system.

The level detect module serves as the interface between the level sensor and the system. This module monitors level sensors mounted on a hardsheel blood reserviour and communicates any alerts or alarms to the system.

The pressure module serves as the interface between up to two pressure transducers and the system. This module monitors signals from the pressure transducers and communicates pressure values, alerts, and alarms to the system.

The RS-232 Interface Module provides the interface between the RS-232 protocol data acquistion software and the system. The module outputs system data to the data acquisition software such as Tlink Data management Software.

The interface between the temperature sensor and the rest of the system.

The Interface Module for CDI 100 provides the interface between a CDI ™ 100 or CDI™ 100 Saturation/Hematocrit Monitor and the APS1. The module communicates the CDI monitor values to the system for display on the CCM.

The Interface Module for CDI 500 Module provides the interface between the CDI™ 500 Blood Parameter Monitoring System and the APS1. The module communicates the CDI 500 monitor values to the system for display on the CCM.

The occluder module serves as the interface between the occluder head and the system. The occluder system is controlled from the CCM, and can be configured to respond to primary pump events.

This kit is provided to store and house miscellaneous items: roller pump knob colored caps, wire markers and tags, spare fasteners, tools that may be needed, and replacement air filter.

The Configuration PC Card is used to backup System 1 Perfusion Configurations. These cards also allow the renaming and deletion of PerfusionConfigurations.

A PC Card contained in one of the CCM card slots that stores a system activity log and is used by authorized service personnel

Cable used to connect the CDI data module to the intended CDI device.

Cable used to connect the data module to the intended device.

The occluder head provides a computer-controlled tube occlusion mechanism. The occluder head is controlled via signals received from the occluder module. The occulder head can be detached from the occluder module.

The air sensor is a non-invasive, ultrasonic sensor that can detect air bubbles in the perfusion circuit. This is the 3/8"x3/32" sensor.

The flow sensor is a non-invasive ultrasonic transducer used to measure fluid velocity.

Central Control Monitor (CCM) combines an embedded computer, a touch screen, and a Graphical User Interface (GUI) to provide a centralized display of system information and onscreen control of all system devices

The small roller pump is a peristaltic pump with a 4 inch (10 cm) raceway that can be used for arterial, cardioplegia, vent, and suction applications. A universl tube clamp mechanism accommodates a variety of tubing sizes, including dual tube sets.

The large roller pump is a peristaltic pump with a 6 inch (15 cm) raceway that can be used for arterial, cardioplegia, vent, and suction applications. A universl tube clamp mechanism accommodates a variety of tubing sizes, including dual tube sets.

The centrifugal control unit provides the local display and control mechanism for the centrifugal motor and disposable pump and serves as the interface between the centrifugal motor and the rest of the system. The local display indicates the motor speed, flow rate, and safety, status and error messages. The pump can be controlled from either the CCM or from the control knob on the control unit.

Cable assembly, for use with the air bubble detection module and sensor