CONSOLE R5100052 PERFORMER CPB,UNIV

CONSOLE, RR5100052 RECON PCPB

Quantum Smart Occluder - Left Hand

Quantum Smart Occluder - Right Hand

PRE-CONNECTED PACK

Flow meter

The air sensor is a non-invasive, ultrasonic sensor that can detect air bubbles in the perfusion circuit. This is the 3/8"x3/32" sensor.

Base, for Sarns™ Modular Perfusion System 8000

8000 Perfusion System Arterial Monitor Providing Temperature and Pressure Measurement Display.

Cardioplegia Monitor

CDI 500 Comm module for TCVS Sarns 8000

Line Occluder

The centrifugal motor is the drive mechanism necessary to pump fluid through a disposable centrifugal pump which is magnetically coupled to the motor.

Manual drive motor used to rotate the disposable centrifugal pump in the event of electrical power loss.

Ultrasonic couplant used to facilitate the transmission of sound energy between the flow sensor and extracorporeal tubing.

The level sensor is an ultrasonic transducer that is mounted on a hardshell blood reservoir and detects the presence or absence of blood or prime solution at the point of detection. Yellow.

The level sensor is an ultrasonic transducer that is mounted on a hardshell blood reservoir and detects the presence or absence of blood or prime solution at the point of detection. Red.

The air sensor is a non-invasive, ultrasonic sensor that can detect air bubbles in the perfusion circuit. This is the 3/8"x3/32" sensor.

Ultrasonic couplant used to facilitate the transmission of sound energy between the level sensor and the reservoir.

The air sensor is a non-invasive, ultrasonic sensor that can detect air bubbles in the perfusion circuit. This is the 3/8"x3/32" sensor. Includes cable and holder.

The air sensor is a non-invasive, ultrasonic sensor that can detect air bubbles in the perfusion circuit. This is the 1/4"x1/16" sensor. Includes cable and holder.

The air sensor is a non-invasive, ultrasonic sensor that can detect air bubbles in the perfusion circuit. This is the 1/4"x3/32" sensor. Includes cable and holder.

The flow sensor is a non-invasive ultrasonic transducer used to measure fluid flow. Includes ultrasonic coupling gel.

Roller pump hand cranks used to rotate the roller pump occlusion mechanism during an electrical power failure. These hand cranks can be used on either the large 6" or the small 4" roller pumps.

Roller Pump (4" Blue). The small roller pump is a peristaltic pump with a 4 inch (10 cm) raceway that can be used for arterial, cardioplegia, vent, and suction applications. A universal tub clamp mechanism accommodates a variety of tubing sizes, including dual tube sets.

Roller Pump (6" Blue). The large roller pump is a peristaltic pump with a 6 inch (15 cm) raceway that can be used for arterial, cardioplegia, vent, and suction applications. A universal tub clamp mechanism accommodates a variety of tubing sizes, including dual tube sets.

The centrifugal control unit provides the local display and control mechanism for the centrifugal pump and serves as the interface between the centrifugal motor and the rest of the heart-lung system.

The electronic gas blender is an optional module that integrates into the APS1 chassis. It accepts inputs of medical grade oxygen and air, or oxygen and 95/5 (a blend of 95% oxygen and 5% carbon dioxide), and allows the ser to control and regulate the gas output to an oxygenator. A built-in oxygen analyzer measures the oxygen content of the blended gas and provides the information to the system for display on the CCM.

Temperature Module Dual Sensor APS

Central Control Monitor (CCM) combines an embedded computer, a touch screen, and a Graphical User Interface (GUI) to provide a centralized display of system information and onscreen control of all system devices

Lamp Assembly, LED, APS1

Pressure Module Dual Sensor APS

Solid State Drive, CCMD, Sub-Assembly

Programmed USB Flash Drive, System Configuration

Programmed USB Flash Drive, System Configuration

Programmed USB Flash Drive, System Upgrade, CCMD

The mounting arm attaches to the APS1 vertically mounting pole and is used as a mount for the Central Control Monitor.