CGS Drill, 3.2 x 24mm, Single Use

CGS Drill, 3.2 x 28mm, Single Use

CGS Drill, 3.7 x 17mm, Single Use

CGS Drill, 3.7 x 21mm, Single Use

CGS Drill, 3.7 x 24mm, Single Use

CGS Drill, 3.7 x 28mm, Single Use

CGS Drill, 4.1 x 17mm, Single Use

CGS Drill, 4.1 x 21mm, Single Use

CGS Drill, 4.1 x 24mm, Single Use

CGS Drill, 4.1 x 28mm, Single Use

CGS Drill, 4.7 x 17mm, Single Use

CGS Drill, 4.7 x 21mm, Single Use

CGS Drill, 4.7 x 24mm, Single Use

CGS Drill, 4.7 x 28mm, Single Use

CGS Drill, 5.4 x 17mm, Single Use

CGS Drill, 5.4 x 21mm, Single Use

CGS Drill, 5.4 x 24mm, Single Use

CGS Drill, 5.4 x 28mm, Single Use

MDL/MILO Black Replacement Micro O-Ring (10 pieces)

MDL/MILO Micro Metal Housing w/ Soft O-Ring

5.7mm Titanium Scan Body

4.5mm Titanium Scan Body

Short Titanium Coping/Base Multi-unit

Multi-Unit Titanium Scan Body

3.5mm Titanium Scan Body

2.5mm Tapered Surgical Drill, Grey, 7.5mm

2.5mm Tapered Surgical Drill, Grey, 9mm

2.5mm Tapered Surgical Drill, Grey, 10.5mm

2.5mm Tapered Surgical Drill, Grey, 12mm

2.5mm Tapered Surgical Drill, Grey, 15mm

3.0mm Titanium Scan Body

SmartSDGrip 6.75 mm diameter: Clip recess underside of finger dental implant screwdriver with floss tether attachment. Resilient slide lock. Single use.

SmartSDGrip 7.0 mm diameter: Clip recess underside of finger dental implant screwdriver with floss tether attachment. Resilient slide lock. Single use.

SmartSDGrip 7.75 mm diameter: Clip recess underside of finger dental implant screwdriver with floss tether attachment. Resilient slide lock. Single use.

SmartSDGrip 8.75 mm in diameter: Clip recess of finger dental implant screwdriver with floss tether attachment. Resilient slide lock. Single use.

Intended to be used for fabrication of surgical guide

Intended to be used for fabrication of surgical guide

Provides vertical control for drilling the osteotomy. The G-Stop Gauges and G-Stop Keys can be used with printed guides to control the angulation of the hole

Provides vertical control for drilling the osteotomy. The G-Stop Gauges and G-Stop Keys can be used with printed guides to control the angulation of the hole

Provides vertical control for drilling the osteotomy. The G-Stop Gauges and G-Stop Keys can be used with printed guides to control the angulation of the hole

Provides vertical control for drilling the osteotomy. The G-Stop Gauges and G-Stop Keys can be used with printed guides to control the angulation of the hole

a holding device in the surgical operatory for the Densah Burs, Tapered Pilot Drill and Parallel Pins

Open Tray Impression Transfer Short, 3.5mm

Open Tray Impression Transfer Long, 3.5mm

Open Tray Impression Transfer Short, 4.3mm

Open tray Impression Transfer Long, 4.3mm