Endoscopy Procedure Kit

SharnSelect Single Ended Brush, Brass Bristle, 7.25”

SharnSelect Single End Brush, Brass Bristle, 7.25" PK3

SharnSelect Double Sided Brush, Nylon /Stainless, 7.125”

SharnSelect Dbl Sided Brush, Nylon /Stainless, 7.125" PK3

SharnSelect Double Ended Brush, Nylon Bristle, Firm, 6.8”

SharnSelect Double End Brush, Nylon Bristle, Firm, 6.8" PK3

SharnSelect Double Ended Brush, Nylon Bristle, Ex Firm, 6.8”

SharnSelect Double End Brush, Nylon Bristle, X Firm 6.8" PK3

SharnSelect Hand and Nail Brush

Safe-Soak Endo Sponge Tubular Sponge/Dispenser Box PK25

Safe-Soak Endo Sponge Flat Sponge/Dispenser Box PK50

SharnSelect Brush, 18.5" x 15mm, Purple

SharnSelect Brush, 18.5" x 1.5mm, Gray

SharnSelect Brush, 18.5" x 20mm, Navy

SharnSelect Brush, 18.5" x 2mm, Red

SharnSelect Brush, 18.5" x 2.5mm, Orange

SharnSelect Brush, 18.5" x 3mm, White

SharnSelect Brush, 18.5" x 4mm, Lt Blue

SharnSelect Brush, 18.5" x 5mm, Green

SharnSelect Brush, 18.5" x 6mm, Black

Twisted Wire Brush, 16.5" x 5mm, Green Bead

Twisted Wire Brush, 16.5" x 7mm, Yellow Bead

Twisted Wire Brush, 16.5" x 12mm, No Bead

Twisted Wire Brush, 16.5" x 10mm, Pink Bead

Twisted Wire Brush, 12.5" x 2mm, Red Bead

Twisted Wire Brush, 12.5" x 3mm, White Bead

Twisted Wire Brush, 12.5" x 4mm, Lt Blue Bead

Twisted Wire Brush, 12.5" x 5mm, Green Bead

Twisted Wire Brush, 12.5" x 6mm, Black Bead

Twisted Wire Brush, 24.5" x 2.5mm, Orange Bead

Twisted Wire Brush, 24.5" x 5mm, Green Bead

Twisted Wire Brush, 24.5" x 7mm, Yellow Bead

Twisted Wire Brush, 24.5" x 10mm, Pink Bead

Reamer Brush, Double Ended

Dri-Scope Aid-Cabinet [Gen 2]; Manifold; Series 2305; DSC2-M1-2305-TSI-R; TRICOR Label; Refurbished;Dri-Scope Aid - Cabinet Gen 2 system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis around the clock. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) 23” wide / 5 port manifold is one component of the Dri-Scope Aid – Cabinet system that receives the HEPA filtered air from the system pump and distributes it to the endoscope(s) for the purpose of drying and venting.

Dri-Scope Aid-Cabinet [Gen 2]; Manifold; Series 2310; DSC2-M1-2310-TSI-R; TRICOR Label; Refurbished;Dri-Scope Aid - Cabinet Gen 2 system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis around the clock. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) 23” wide / 10 port manifold is one component of the Dri-Scope Aid – Cabinet system that receives the HEPA filtered air from the system pump and distributes it to the endoscope(s) for the purpose of drying and venting.

Dri-Scope Aid-Cabinet [Gen 2]; Manifold; Series 2310; DSC2-M1-2310-TSI; TRICOR Label;Dri-Scope Aid - Cabinet Gen 2 system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis around the clock. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) 23” wide / 10 port manifold is one component of the Dri-Scope Aid – Cabinet system that receives the HEPA filtered air from the system pump and distributes it to the endoscope(s) for the purpose of drying and venting.

Dri-Scope Aid-Cabinet [Gen 2]; Manifold; Series 3308; DSC2-M1-3308-TSI-R; TRICOR Label; Refurbished;Dri-Scope Aid - Cabinet Gen 2 system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis around the clock. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) 33” wide / 8 port manifold is one component of the Dri-Scope Aid – Cabinet system that receives the HEPA filtered air from the system pump and distributes it to the endoscope(s) for the purpose of drying and venting.

Dri-Scope Aid-Cabinet [Gen 2]; Manifold; Series 3308; DSC2-M1-3308-TSI; TRICOR Label;Dri-Scope Aid - Cabinet Gen 2 system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis around the clock. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) 33” wide / 8 port manifold is one component of the Dri-Scope Aid – Cabinet system that receives the HEPA filtered air from the system pump and distributes it to the endoscope(s) for the purpose of drying and venting.

Dri-Scope Aid-Cabinet [Gen 2]; Manifold; Series 3316; DSC2-M1-3316-TSI-R; TRICOR Label; Refurbished;Dri-Scope Aid - Cabinet Gen 2 system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis around the clock. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) 33” wide / 16 port manifold is one component of the Dri-Scope Aid – Cabinet system that receives the HEPA filtered air from the system pump and distributes it to the endoscope(s) for the purpose of drying and venting.

Dri-Scope Aid-Cabinet [Gen 2]; Manifold; Series 3316; DSC2-M1-3316-TSI; TRICOR Label;Dri-Scope Aid - Cabinet Gen 2 system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis around the clock. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) 33” wide / 16 port manifold is one component of the Dri-Scope Aid – Cabinet system that receives the HEPA filtered air from the system pump and distributes it to the endoscope(s) for the purpose of drying and venting.

Dri-Scope Aid - Cabinet refurbished system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis around the clock. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) 23” wide / 5 port manifold is one component of the Dri-Scope Aid – Cabinet system that receives the HEPA filtered air from the system pump and distributes it to the endoscope(s) for the purpose of drying and venting.

DSA-Cabinet; Manifold; Series 2310; DSAC-M2-2310-TSI-R; TRICOR Label; Refurbished;Dri-Scope Aid - Cabinet refurbished system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis around the clock. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) 23” wide / 10 port manifold is one component of the Dri-Scope Aid – Cabinet system that receives the HEPA filtered air from the system pump and distributes it to the endoscope(s) for the purpose of drying and venting.

DSA-Cabinet; Manifold; Series 3308; DSAC-M2-3308-TSI-R; TRICOR Label; Refurbished;Dri-Scope Aid - Cabinet refurbished system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis around the clock. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) 33” wide / 8 port manifold is one component of the Dri-Scope Aid – Cabinet system that receives the HEPA filtered air from the system pump and distributes it to the endoscope(s) for the purpose of drying and venting.

DSA-Cabinet; Manifold; Series 3316; DSAC-M2-3316-TSI-R; TRICOR Label; Refurbished;Dri-Scope Aid - Cabinet refurbished system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis around the clock. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) 33” wide / 16 port manifold is one component of the Dri-Scope Aid – Cabinet system that receives the HEPA filtered air from the system pump and distributes it to the endoscope(s) for the purpose of drying and venting.

Dri-Scope Aid-Cabinet [Gen 2]; Pump Ceiling BL1; Series 1840; DSC2-PC3-TSI-R; TRICOR Label; Refurbished;Dri-Scope Aid - Cabinet Gen 2 system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) ceiling-mounted pump version is one component of the Dri-Scope Aid – Cabinet system that contains an internal pump used to provide HEPA filtered air to other parts of the system. This pump component is used along with 2 (or 1) of the Dri-Scope Aid - Manifolds which together works as a drying system. This component has been refurbished to a condition of safety and effectiveness that is comparable to when new.

Dri-Scope Aid-Cabinet; Pump Wall BL1; Series 1840; DSAC-PW3-MOB-R; TRICOR Label; Refurbished;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) wall-mounted pump version is one component of the Dri-Scope Aid – Cabinet system that contains an internal pump used to provide HEPA filtered air to other parts of the system. This pump component is used along with 2 (or 1) of the Dri-Scope Aid - Manifolds which together works as a drying system. Note: this system has been programmed to accept external software commands and/or remote monitoring via Mobile Aspects proprietary hardware and software. This component has been refurbished to a condition of safety and effectiveness that is comparable to when new.

Dri-Scope Aid-Cabinet; Pump Wall BL1; Series 1840; DSAC-PW3-MOB; TRICOR Label;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) wall-mounted pump version is one component of the Dri-Scope Aid – Cabinet system that contains an internal pump used to provide HEPA filtered air to other parts of the system. This pump component is used along with 2 (or 1) of the Dri-Scope Aid - Manifolds which together works as a drying system. Note: this system has been programmed to accept external software commands and/or remote monitoring via Mobile Aspects proprietary hardware and software.

Dri-Scope Aid-Cabinet [Gen 2]; Pump Wall BL1; Series 1840; DSC2-PW3-TSI-R; TRICOR Label; Refurbished;Dri-Scope Aid - Cabinet Gen 2 system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) wall-mounted pump version is one component of the Dri-Scope Aid – Cabinet system that contains an internal pump used to provide HEPA filtered air to other parts of the system. This pump component is used along with 2 (or 1) of the Dri-Scope Aid - Manifolds which together works as a drying system. This pump component has been refurbished to a condition of safety and effectiveness that is comparable to when new.