ACU 1060.1 Transtracheal Catheter provides tracheal access for manual jet ventilators. The attached syringe helps to determine correct needle placement in the trachea by air aspiration. Needle size: 13Gauge / Adult RX only.

ACU 1060.2 Transtracheal Catheter provides tracheal access for manual jet ventilators. The attached syringe helps to determine correct needle placement in the trachea by air aspiration. Needle size: 14Gauge / Child RX only.

The ADP 150 Hose Connector: Dimensions - 15mm O.D. x 1/2" O/D. Reusable.

A device with a handle used to plug the end of an anesthesia circuit/breathing circuit at two possible locations: the Y-piece or the gas sampling elbow. The temporary plugging of the anesthesia breathing circuit allows anesthetic gases to be flushed from the anesthesia machine through the WAG (waste anesthetic gas) scavenging line by way of continuous oxygen/air flow rate over a set amount of time, or by activating the flush valve and applying positive bag pressure in repeated succession. This practice reduces the amount of anesthetic gas released into the operating room and thus reduces harmful gas exposure to operating room personnel and premature anesthetic gas exposure to patients during preoxygenation or mask induction.There is no patient contact as the plug must be removed before the breathing circuit can be attached to a mask, endo/naso-tracheal tube, or any other breathing device.

Curved Macintosh laryngoscope blade Size 1 - 87mm

Curved Macintosh laryngoscope blade Size 2 - 108mm

Curved Macintosh laryngoscope blade Size 3 - 130mm

Curved Macintosh laryngoscope blade Size 4 - 158mm

Straight Miller laryngoscope blade Size 0 - 75mm

Straight Miller laryngoscope blade Size 1 - 102mm

Straight Miller laryngoscope blade Size 1.5 - 127mm

Straight Miller laryngoscope blade Size 2 - 155mm

Straight Miller laryngoscope blade Size 3 - 195mm

Straight Miller laryngoscope blade Size 4 - 205mm

Wall-mounted storage box provides storage and immediate availability for emergency-use items such as oxygen masks, resuscitator bags, airways, masks, filters, etc. (The storage box does not include these items.) Dimensions: 20" Length x 8" Width x 6" Depth.

BE 1000-2 Bag Hanger mates with arm of O2 Instant Flow Valve to support a resuscitation bag. This is an accessory to the BE 3000 Series Oxygen Instant Flow Valves. Reusable.

Tapered Connector - 22mm ID x 27mm ID. Fits components of adult ventilator circuits. Molded of silicone rubber. Reusable.

Straight Connector - 22mm ID x 22mm ID. Fits components of adult ventilator circuits. Molded of silicone rubber. Reusable.

Ventilator Tubing Accessory - Swivel Tubing Clamp. Swivels 360 degrees; fits tubing and rails 1/2" to 1" inch diameter.

The BE 105-101-40 Pressure Adapter with Connector: Dimensions - Barbed port fits 3/16" I.D. tubing x 15mm I.D./22mm O.D. x 22mm I/D (silicone connector end) . Barbed port is capped with a silicone rubber cap.

Swivel Adapter 22mm ID x 15mm ID/22mm OD. Specialty adapter for ventilator circuits/CPAP systems. Swivels 360 degrees. Molded of polypropylene. Single Patient Use.

General Adapter - 22mm ID x 22mm ID adapter for use in breathing/ventilator circuit. Molded of polycarbonate. Reusable.

General Adapter - 22mm ID x 22mm ID adapter for use in breathing/ventilator circuit. Molded of polystyrene butadiene, Single Patient Use.

The BE 105-40 Pressure Adapter: Dimensions - Barbed port fits 3/16" I.D. tubing, x 15mm I.D./22mm O.D. x 15mm I.D./22mm O.D. Barbed port is capped with a silicone rubber cap.

BE 105-7 Bronchoscope Swivel - 15mm ID (patient port) x15mm OD (equipment port). Reusable. Fits components of adult ventilator circuits. Molded of polyetherimide. Includes two silicone rubber caps; one cap allows for the use of a suctioning catheter while the other cap allows for the use of a fiber-optic bronchoscope without significant loss of PEEP.