Titanium alloy cross elements are designed to provide additional support to the humeral head by entering the posts perpendicular to the axis of the cortical thread of the posts.

Titanium alloy cross elements are designed to provide additional support to the humeral head by entering the posts perpendicular to the axis of the cortical thread of the posts.

Titanium alloy cross elements are designed to provide additional support to the humeral head by entering the posts perpendicular to the axis of the cortical thread of the posts.

The titanium alloy cortical locking screws are used to affix the plate to the humerus. The screws are 3.5mm diameter and are available in various lengths from 20mm to 45mm.

The titanium alloy cortical locking screws are used to affix the plate to the humerus. The screws are 3.5mm diameter and are available in various lengths from 20mm to 45mm.

The titanium alloy cortical locking screws are used to affix the plate to the humerus. The screws are 3.5mm diameter and are available in various lengths from 20mm to 45mm.

The titanium alloy cortical locking screws are used to affix the plate to the humerus. The screws are 3.5mm diameter and are available in various lengths from 20mm to 45mm.

The titanium alloy cortical locking screws are used to affix the plate to the humerus. The screws are 3.5mm diameter and are available in various lengths from 20mm to 45mm.

The titanium alloy cortical locking screws are used to affix the plate to the humerus. The screws are 3.5mm diameter and are available in various lengths from 20mm to 45mm.

The titanium alloy cortical screws are used to affix the plate to the humerus. The screws are 3.5mm diameter and are available in various lengths from 20mm to 34mm.

The titanium alloy cortical screws are used to affix the plate to the humerus. The screws are 3.5mm diameter and are available in various lengths from 20mm to 34mm.

The titanium alloy cortical screws are used to affix the plate to the humerus. The screws are 3.5mm diameter and are available in various lengths from 20mm to 34mm.

The titanium alloy cortical screws are used to affix the plate to the humerus. The screws are 3.5mm diameter and are available in various lengths from 20mm to 34mm.

The titanium alloy cortical screws are used to affix the plate to the humerus. The screws are 3.5mm diameter and are available in various lengths from 20mm to 34mm.

The titanium alloy cortical screws are used to affix the plate to the humerus. The screws are 3.5mm diameter and are available in various lengths from 20mm to 34mm.

The titanium alloy cortical screws are used to affix the plate to the humerus. The screws are 3.5mm diameter and are available in various lengths from 20mm to 34mm.

The titanium alloy cortical screws are used to affix the plate to the humerus. The screws are 3.5mm diameter and are available in various lengths from 20mm to 34mm.

Titanium alloy posts are used to affix the proximal end of the plate to the proximal end of the humerus. With the aid of fixtures, the posts have the ability to have cross elements inserted perpendicular to the axis of the cortical thread of the post. The head of the post is a threaded locking configuration that accepts an expansion cap screw. The posts are 5.25mm in diameter and are available in 5 lengths ranging from 30mm to 50mm.

Titanium alloy posts are used to affix the proximal end of the plate to the proximal end of the humerus. With the aid of fixtures, the posts have the ability to have cross elements inserted perpendicular to the axis of the cortical thread of the post. The head of the post is a threaded locking configuration that accepts an expansion cap screw. The posts are 5.25mm in diameter and are available in 5 lengths ranging from 30mm to 50mm.

Titanium alloy posts are used to affix the proximal end of the plate to the proximal end of the humerus. With the aid of fixtures, the posts have the ability to have cross elements inserted perpendicular to the axis of the cortical thread of the post. The head of the post is a threaded locking configuration that accepts an expansion cap screw. The posts are 5.25mm in diameter and are available in 5 lengths ranging from 30mm to 50mm.

Titanium alloy posts are used to affix the proximal end of the plate to the proximal end of the humerus. With the aid of fixtures, the posts have the ability to have cross elements inserted perpendicular to the axis of the cortical thread of the post. The head of the post is a threaded locking configuration that accepts an expansion cap screw. The posts are 5.25mm in diameter and are available in 5 lengths ranging from 30mm to 50mm.

Titanium alloy posts are used to affix the proximal end of the plate to the proximal end of the humerus. With the aid of fixtures, the posts have the ability to have cross elements inserted perpendicular to the axis of the cortical thread of the post. The head of the post is a threaded locking configuration that accepts an expansion cap screw. The posts are 5.25mm in diameter and are available in 5 lengths ranging from 30mm to 50mm.

Drill Bits are of various diameters and lengths, and are made of Stainless Steel, heat-treated and passivated. Some drill bits have laser marked scales to show depth of drill.

Drill Bits are of various diameters and lengths, and are made of Stainless Steel, heat-treated and passivated. Some drill bits have laser marked scales to show depth of drill.

Guides are stainless steel parts of various designs that allow various drill diameters. Some guides are laser weld assemblies with a handle, and others are threaded to screw into plates.

Drivers are of various tips and handle geometry and are made of stainless steel that is heat treated and passivated. Driver assembly handles are made from machined Radel.

Drivers are of various tips and handle geometry and are made of stainless steel that is heat treated and passivated. Driver assembly handles are made from machined Radel.

Drivers are of various tips and handle geometry and are made of stainless steel that is heat treated and passivated. Driver assembly handles are made from machined Radel.

Drivers are of various tips and handle geometry and are made of stainless steel that is heat treated and passivated. Driver assembly handles are made from machined Radel.

Guides are stainless steel parts of various designs that allow various drill diameters. Some guides are laser weld assemblies with a handle, and others are threaded to screw into plates.

Guides are stainless steel parts of various designs that allow various drill diameters. Some guides are laser weld assemblies with a handle, and others are threaded to screw into plates.

Guides are stainless steel parts of various designs that allow various drill diameters. Some guides are laser weld assemblies with a handle, and others are threaded to screw into plates.

K-wires are stainless steel wires of various lengths and diameters.

Caddies are assemblies of various layouts that hold screws, and post of various lengths and types. The base is of machined Polypropylene, and lids of Smoked Radel.

Sterilization Tray for Pantera Implants, Instruments and Screw Caddy/Caddies.

Depth Gauges are assemblies made from stainless steel parts, with an outer housing, and a scaled slide with tip to measure depth of screw holes. Some assemblies use a Silicone O-ring for friction hold.

Guides are stainless steel parts of various designs that allow various drill diameters. Some guides are laser weld assemblies with a handle, and others are threaded to screw into plates.

Guides are stainless steel parts of various designs that allow various drill diameters. Some guides are laser weld assemblies with a handle, and others are threaded to screw into plates.

Guides are stainless steel parts of various designs that allow various drill diameters. Some guides are laser weld assemblies with a handle, and others are threaded to screw into plates.

The shoulder plates are made of titanium alloy and are designed in right and left configurations, as well as various length configurations. The plates are contoured to provide a close fit with the anatomy of the proximal humerus. The distal segment of the plate is provided with between 4 (73mm configuration) and 13 (220mm configuration) holes to accommodate 3.5mm diameter locking or non-locking cortical screws. The proximal segment of the plate has 2 locking screw holes and 3 locking post holes. Around the proximal end are also 4 suture clips.

The shoulder plates are made of titanium alloy and are designed in right and left configurations, as well as various length configurations. The plates are contoured to provide a close fit with the anatomy of the proximal humerus. The distal segment of the plate is provided with between 4 (73mm configuration) and 13 (220mm configuration) holes to accommodate 3.5mm diameter locking or non-locking cortical screws. The proximal segment of the plate has 2 locking screw holes and 3 locking post holes. Around the proximal end are also 4 suture clips.

The shoulder plates are made of titanium alloy and are designed in right and left configurations, as well as various length configurations. The plates are contoured to provide a close fit with the anatomy of the proximal humerus. The distal segment of the plate is provided with between 4 (73mm configuration) and 13 (220mm configuration) holes to accommodate 3.5mm diameter locking or non-locking cortical screws. The proximal segment of the plate has 2 locking screw holes and 3 locking post holes. Around the proximal end are also 4 suture clips.

The shoulder plates are made of titanium alloy and are designed in right and left configurations, as well as various length configurations. The plates are contoured to provide a close fit with the anatomy of the proximal humerus. The distal segment of the plate is provided with between 4 (73mm configuration) and 13 (220mm configuration) holes to accommodate 3.5mm diameter locking or non-locking cortical screws. The proximal segment of the plate has 2 locking screw holes and 3 locking post holes. Around the proximal end are also 4 suture clips

The shoulder plates are made of titanium alloy and are designed in right and left configurations, as well as various length configurations. The plates are contoured to provide a close fit with the anatomy of the proximal humerus. The distal segment of the plate is provided with between 4 (73mm configuration) and 13 (220mm configuration) holes to accommodate 3.5mm diameter locking or non-locking cortical screws. The proximal segment of the plate has 2 locking screw holes and 3 locking post holes. Around the proximal end are also 4 suture clips.

The shoulder plates are made of titanium alloy and are designed in right and left configurations, as well as various length configurations. The plates are contoured to provide a close fit with the anatomy of the proximal humerus. The distal segment of the plate is provided with between 4 (73mm configuration) and 13 (220mm configuration) holes to accommodate 3.5mm diameter locking or non-locking cortical screws. The proximal segment of the plate has 2 locking screw holes and 3 locking post holes. Around the proximal end are also 4 suture clips.

The shoulder plates are made of titanium alloy and are designed in right and left configurations, as well as various length configurations. The plates are contoured to provide a close fit with the anatomy of the proximal humerus. The distal segment of the plate is provided with between 4 (73mm configuration) and 13 (220mm configuration) holes to accommodate 3.5mm diameter locking or non-locking cortical screws. The proximal segment of the plate has 2 locking screw holes and 3 locking post holes. Around the proximal end are also 4 suture clips.

The shoulder plates are made of titanium alloy and are designed in right and left configurations, as well as various length configurations. The plates are contoured to provide a close fit with the anatomy of the proximal humerus. The distal segment of the plate is provided with between 4 (73mm configuration) and 13 (220mm configuration) holes to accommodate 3.5mm diameter locking or non-locking cortical screws. The proximal segment of the plate has 2 locking screw holes and 3 locking post holes. Around the proximal end are also 4 suture clips.

The shoulder plates are made of titanium alloy and are designed in right and left configurations, as well as various length configurations. The plates are contoured to provide a close fit with the anatomy of the proximal humerus. The distal segment of the plate is provided with between 4 (73mm configuration) and 13 (220mm configuration) holes to accommodate 3.5mm diameter locking or non-locking cortical screws. The proximal segment of the plate has 2 locking screw holes and 3 locking post holes. Around the proximal end are also 4 suture clip.

The shoulder plates are made of titanium alloy and are designed in right and left configurations, as well as various length configurations. The plates are contoured to provide a close fit with the anatomy of the proximal humerus. The distal segment of the plate is provided with between 4 (73mm configuration) and 13 (220mm configuration) holes to accommodate 3.5mm diameter locking or non-locking cortical screws. The proximal segment of the plate has 2 locking screw holes and 3 locking post holes. Around the proximal end are also 4 suture clips.

Component of Sterilization Tray.