LOHMAN TECHNOLOGIES, LLC 790.0102.001 AfibAlert

The hom ecg+ / AfibAlert® is a cardiac event recorder capable of recording and storing approximately thirty 45-second events in solid-state non-volatile memory. The hom ecg+ / AfibAlert® allows patients who have been diagnosed with, or are susceptible to developing atrial fibrillation (AF) to take periodic readings with a computerized rhythm monitor. The system was developed for the patient that is at risk or has been previously diagnosed with AF, has a history of heart bypass, ablation, or other cardiac abnormality, or is on heart (anti-arrhythmic) medication. In these cases, detecting and determining AF early can potentially reduce the risk of heart attack and stroke.The device can record a single channel of ECG data in three ways: (I) via the two thumb electrodes, (2) by applying wrist electrodes or (3) applying two sticky electrodes as instructed by their health care practitioner. In each case, the patient initiates the recording. An individual recording will take ~45 seconds. Immediately following data acquisition, an internal AF algorithm is used to analyze the patient's rhythm.The built-in graphical LCD display indicates the presence or absence of AF. If ECG data is present (whether or not AF is indicated) the device uses an internal cellular module to transfer the ECG data to the cloud to be viewed and/or shared with their physician or health care practitioner using either company developed or third party developed internet based software program(s).

REUSABLE and STERILIZABLE device designed to remove a broken prosthetic screw from the inside of a dental implant.

The Osseoflex® SB is designed for use in balloon kyphoplasty. The balloon serves to create a cavity in the vertebral body, thereby reducing the fracture while still allowing for cement interdigitation. The balloon catheter is the functional part of the device that creates a cavity and reduces the fracture. The balloon catheter provides a conduit through which the physician can inflate the balloon at the distal end of the catheter. After the bone is disrupted, PMMA is injected through an Osseoflex® SN+ steerable needle to fill the previously created void(s).An access channel is required for Osseoflex® SB placement. The Osseoflex® SB device does not create an access channel; the Osseoflex® SB is designed to follow a pre-existing channel created by an access channel device. The articulating or steering feature of the device assists the clinician in directing the device through the pre-existingchannel. The Osseoflex® SB knob can be turned clockwise to aid in directing the distal portion of the device. Turning the knob counter-clockwise will relax the device and allow the device to be returned to its start position. The device should be manipulated only while under fluoroscopic observation with radiographic equipment that provides high quality images.

The Osseoflex® SB is designed for use in balloon kyphoplasty. The balloon serves to create a cavity in the vertebral body, thereby reducing the fracture while still allowing for cement interdigitation. The balloon catheter is the functional part of the device that creates a cavity and reduces the fracture. The balloon catheter provides a conduit through which the physician can inflate the balloon at the distal end of the catheter. After the bone is disrupted, PMMA is injected through an Osseoflex® SN+ steerable needle to fill the previously created void(s).An access channel is required for Osseoflex® SB placement. The Osseoflex® SB device does not create an access channel; the Osseoflex® SB is designed to follow a pre-existing channel created by an access channel device. The articulating or steering feature of the device assists the clinician in directing the device through the pre-existingchannel. The Osseoflex® SB knob can be turned clockwise to aid in directing the distal portion of the device. Turning the knob counter-clockwise will relax the device and allow the device to be returned to its start position. The device should be manipulated only while under fluoroscopic observation with radiographic equipment that provides high quality images.

Zoll M series Biphasic 200 Joules Max Defibrillator. Battery and Cables Included.

Burr, Oval, 10 flute, 3.0mm

Table in great working condition. Moves up and down. Very tiny tear in vinyl (picture shown)

The hom ecg+ / AfibAlert® is a cardiac event recorder capable of recording and storing approximately thirty 45-second events in solid-state non-volatile memory. The hom ecg+ / AfibAlert® allows patients who have been diagnosed with, or are susceptible to developing atrial fibrillation (AF) to take periodic readings with a computerized rhythm monitor. The system was developed for the patient that is at risk or has been previously diagnosed with AF, has a history of heart bypass, ablation, or other cardiac abnormality, or is on heart (anti-arrhythmic) medication. In these cases, detecting and determining AF early can potentially reduce the risk of heart attack and stroke.The device can record a single channel of ECG data in three ways: (I) via the two thumb electrodes, (2) by applying wrist electrodes or (3) applying two sticky electrodes as instructed by their health care practitioner. In each case, the patient initiates the recording. An individual recording will take ~45 seconds. Immediately following data acquisition, an internal AF algorithm is used to analyze the patient's rhythm.The built-in graphical LCD display indicates the presence or absence of AF. If ECG data is present (whether or not AF is indicated) the device uses an internal cellular module to transfer the ECG data to the cloud to be viewed and/or shared with their physician or health care practitioner using either company developed or third party developed internet based software program(s).

REUSABLE and STERILIZABLE device designed to remove a broken prosthetic screw from the inside of a dental implant.

The Osseoflex® SB is designed for use in balloon kyphoplasty. The balloon serves to create a cavity in the vertebral body, thereby reducing the fracture while still allowing for cement interdigitation. The balloon catheter is the functional part of the device that creates a cavity and reduces the fracture. The balloon catheter provides a conduit through which the physician can inflate the balloon at the distal end of the catheter. After the bone is disrupted, PMMA is injected through an Osseoflex® SN+ steerable needle to fill the previously created void(s).An access channel is required for Osseoflex® SB placement. The Osseoflex® SB device does not create an access channel; the Osseoflex® SB is designed to follow a pre-existing channel created by an access channel device. The articulating or steering feature of the device assists the clinician in directing the device through the pre-existingchannel. The Osseoflex® SB knob can be turned clockwise to aid in directing the distal portion of the device. Turning the knob counter-clockwise will relax the device and allow the device to be returned to its start position. The device should be manipulated only while under fluoroscopic observation with radiographic equipment that provides high quality images.

The Osseoflex® SB is designed for use in balloon kyphoplasty. The balloon serves to create a cavity in the vertebral body, thereby reducing the fracture while still allowing for cement interdigitation. The balloon catheter is the functional part of the device that creates a cavity and reduces the fracture. The balloon catheter provides a conduit through which the physician can inflate the balloon at the distal end of the catheter. After the bone is disrupted, PMMA is injected through an Osseoflex® SN+ steerable needle to fill the previously created void(s).An access channel is required for Osseoflex® SB placement. The Osseoflex® SB device does not create an access channel; the Osseoflex® SB is designed to follow a pre-existing channel created by an access channel device. The articulating or steering feature of the device assists the clinician in directing the device through the pre-existingchannel. The Osseoflex® SB knob can be turned clockwise to aid in directing the distal portion of the device. Turning the knob counter-clockwise will relax the device and allow the device to be returned to its start position. The device should be manipulated only while under fluoroscopic observation with radiographic equipment that provides high quality images.