MILLAR INC. 825-0101 Mikro-Cath Pressure Catheter

Aspiration Catheter 6 Kit

The TC-510 Pressure Control Unit is a passive interface between the pressure sensor of anystandardized sensitivity Mikro-Tip® catheter and strain gauge pressure monitors or recordingsystems which supply bridge excitation voltage and have balance and calibration controls forfull-bridge strain gauge pressure transducers.The TC-510 contains circuitry which facilitates monitor setup. In the STANDBY (0) positionthe TC-510 provides an electrical zero. In the 100 mmHg (13.3 kPa) position the TC-510provides a signal equal to 100 mmHg (13.3 kPa) at a sensitivity of 5 μV/V/mmHg. Thetransducer is operational in the TRANSDUCER position and the TRANSDUCER BALANCEcontrol allows balancing of the transducer

Separator 6

These Stryker 3002 Ex Secure 2 Beds are in fully functional condition and include electric controls for adjusting the head, foot, and height positions, along with Trendelenburg capabilities. The bed has adjustable side rails and a secure braking system. It also features pressure-relief surfaces.

Dura-Cuf Inflation System - 2-Tube Blood Pressure Inflation System with Luer Slip, Infant

Capsa Avalo Anesthesia Cart with key lock

044 Coronary Aspiration Catheter 140 cm Kit

High Pressure Nephrostomy Balloon Catheter Kit

Separator 12

Mikro-Tip catheters consist of an ultra-miniature pressure sensor(s) at the distal end of a catheter with an electrical connector(s) at the proximal end. The pressure sensor produces an electrical output signal, which varies in direct proportion to the magnitude of sensed pressure or sound. Mikro-Tip catheters are intended for multiple uses.

Aspiration Catheter 6 Kit

The TC-510 Pressure Control Unit is a passive interface between the pressure sensor of anystandardized sensitivity Mikro-Tip® catheter and strain gauge pressure monitors or recordingsystems which supply bridge excitation voltage and have balance and calibration controls forfull-bridge strain gauge pressure transducers.The TC-510 contains circuitry which facilitates monitor setup. In the STANDBY (0) positionthe TC-510 provides an electrical zero. In the 100 mmHg (13.3 kPa) position the TC-510provides a signal equal to 100 mmHg (13.3 kPa) at a sensitivity of 5 μV/V/mmHg. Thetransducer is operational in the TRANSDUCER position and the TRANSDUCER BALANCEcontrol allows balancing of the transducer

Separator 6

These Stryker 3002 Ex Secure 2 Beds are in fully functional condition and include electric controls for adjusting the head, foot, and height positions, along with Trendelenburg capabilities. The bed has adjustable side rails and a secure braking system. It also features pressure-relief surfaces.