VEVAZZ LLC Vevazz LCD Vevazz LCD

BURNISHERS B28/29 TITANIUM OCTAGON HANDLE

Inspirstar IS02LCD is a high-end precision medical instrument used for the relief of pain. This product can generate low intensity current pulses at microampere level (up to 400 microampere) and frequency of pulses (up to 1000Hz). This product have multiple therapy programs. Each program includes multiple sub-programs. Screen display.

The ECHELON, ECHELON ENDOPATH™ and ECHELON FLEX™ families of endoscopic linear cutters and reloads are sterile, single patient use instruments that simultaneously cut and staple tissue. There are six staggered rows of staples, three on either side of the cut line. The 45 mm instruments have a staple line thatis approximately 45 mm long and a cut line that is approximately 42 mm long. The shaft can rotate freely in both directions and an articulation mechanism on articulating instruments enables bending the distal portionof the shaft to facilitate lateral access of the operative site.The instruments are shipped without a reload and must be loaded prior to use. A staple retaining cap on the reload protects the staple leg points during shipping and transportation. The instruments’ lock-out feature is designed to prevent a used reload from being refired.

KermaX Product family is designed to be installed in diagnostic x-ray units and is intended to be used for the measurement of Dose Area Product (DAP)/ DAP rate, exposure time.

Burr, Oval, 10 flute, 3.0mm

VR-LC series, VacReg, Ped Cont 2Mode 200mmHg, Digital

Table in great working condition. Moves up and down. Very tiny tear in vinyl (picture shown)

TUBE OCCLUDING FORCEPS 6

BURNISHERS B28/29 TITANIUM OCTAGON HANDLE

Inspirstar IS02LCD is a high-end precision medical instrument used for the relief of pain. This product can generate low intensity current pulses at microampere level (up to 400 microampere) and frequency of pulses (up to 1000Hz). This product have multiple therapy programs. Each program includes multiple sub-programs. Screen display.

The ECHELON, ECHELON ENDOPATH™ and ECHELON FLEX™ families of endoscopic linear cutters and reloads are sterile, single patient use instruments that simultaneously cut and staple tissue. There are six staggered rows of staples, three on either side of the cut line. The 45 mm instruments have a staple line thatis approximately 45 mm long and a cut line that is approximately 42 mm long. The shaft can rotate freely in both directions and an articulation mechanism on articulating instruments enables bending the distal portionof the shaft to facilitate lateral access of the operative site.The instruments are shipped without a reload and must be loaded prior to use. A staple retaining cap on the reload protects the staple leg points during shipping and transportation. The instruments’ lock-out feature is designed to prevent a used reload from being refired.

KermaX Product family is designed to be installed in diagnostic x-ray units and is intended to be used for the measurement of Dose Area Product (DAP)/ DAP rate, exposure time.