Water fitting, quick-connect for use with oxygenation systems, right angle

Water fitting, quick-connect for use with oxygenation systems, straight

Spare Pump Power Cord for the Centrifugal Pump Back-Up Battery.

Interface cable for Jostra HL 20

Base, for Sarns™ Modular Perfusion System 8000

Instrument Tray 8000/9000, Reconditioned

MP-4 Monitoring Module Holder

Level sensors pads are used to attach the level sensors to a hard shell reservoir. Includes coupling gel.

Monitor with one blood parameter module.

Monitor with one blood parameter module and one H/S Probe.

Monitor with two blood parameter modules.

Monitor with two blood parameter modules and one H/S Probe.

Monitor with one blood parameter module and one H/S Probe.

Monitor with two blood parameter modules and one H/S Probe.

Lamp Long 33"

The interface between the temperature sensor and the rest of the system.

The Interface Module for CDI 100 provides the interface between a CDI ™ 100 or CDI™ 100 Saturation/Hematocrit Monitor and the APS1. The module communicates the CDI monitor values to the system for display on the CCM.

The Interface Module for CDI 500 Module provides the interface between the CDI™ 500 Blood Parameter Monitoring System and the APS1. The module communicates the CDI 500 monitor values to the system for display on the CCM.

The occluder module serves as the interface between the occluder head and the system. The occluder system is controlled from the CCM, and can be configured to respond to primary pump events.

This kit is provided to store and house miscellaneous items: roller pump knob colored caps, wire markers and tags, spare fasteners, tools that may be needed, and replacement air filter.

The Configuration PC Card is used to backup System 1 Perfusion Configurations. These cards also allow the renaming and deletion of PerfusionConfigurations.

A PC Card contained in one of the CCM card slots that stores a system activity log and is used by authorized service personnel

Cable used to connect the CDI data module to the intended CDI device.

Cable used to connect the data module to the intended device.

The occluder head provides a computer-controlled tube occlusion mechanism. The occluder head is controlled via signals received from the occluder module. The occulder head can be detached from the occluder module.

The air sensor is a non-invasive, ultrasonic sensor that can detect air bubbles in the perfusion circuit. This is the 3/8"x3/32" sensor.

The flow sensor is a non-invasive ultrasonic transducer used to measure fluid velocity.

HX2 Temperature Control System Accessory Hose Kit

US hose kit, Oxygen and air hoses used for connecting medical gases to the gas blender.

Central Control Monitor (CCM) combines an embedded computer, a touch screen, and a Graphical User Interface (GUI) to provide a centralized display of system information and onscreen control of all system devices

A bracket that mounts to a vertical pole that will hold two pumps

A bracket that mounts to a vertical pole that extends towards the floor to hold one pump lower than the other brackets are designed for.

The small roller pump is a peristaltic pump with a 4 inch (10 cm) raceway that can be used for arterial, cardioplegia, vent, and suction applications. A universl tube clamp mechanism accommodates a variety of tubing sizes, including dual tube sets.

The large roller pump is a peristaltic pump with a 6 inch (15 cm) raceway that can be used for arterial, cardioplegia, vent, and suction applications. A universl tube clamp mechanism accommodates a variety of tubing sizes, including dual tube sets.

The centrifugal control unit provides the local display and control mechanism for the centrifugal motor and disposable pump and serves as the interface between the centrifugal motor and the rest of the system. The local display indicates the motor speed, flow rate, and safety, status and error messages. The pump can be controlled from either the CCM or from the control knob on the control unit.

The flexible mounting arm attaches to the APS1 vertically mounting pole and is used as a mount for the centrifugal drive motor

Cable assembly, for use with the air bubble detection module and sensor

Water fitting, quick-connect for use with myocardial protection systems

Monitor Pole Clamp, 7" Long, Calibrator Mount, for use with the CDI System 550 Monitor

Monitor Pole Clamp, 4.5" Short, Calibrator Mount, for use with the CDI System 550 Monitor

Cable-head Bracket for use with the CDI System 550 Monitor