Contact gel (1x)

Cable fixation clips (5x)

TOSCA preparation supplies

TOSCA electrolyte

Attachment clips (40x)

TOSCA Fixation rings (60x)

TOSCA sensor 92

Extension cable For TCM3 electrodes, 3m

Extension cable For TCM3 electrodes, 6m

TCM4XX ETX Serial adapter, cable for TCM4XX ETX

TCM4XX ETX Analog adapter cable for TCM4XX ETX

TCM4XX ETX VueLink adapter, cable for TCM4XX ETX

O2 module for the TCM4XX Series

TCM4 combi module, TCpO2/O2 combi module

TCM TOSCA module

TCM CombiM module

TCM4x Alice Int interface cable. Connecting cable to an external device (PSG)

TCM4x Embletta gold interface cable

TCM4x Embla interface cable

TCM4x Embla MDrive interface cable. Connecting cable to an externa device (PSG).

TCM4x Alice DE interface cable. Connecting cable to an external device (PSG).

D826 Accessory kit for TC pO2 electrode

D282 Fixation kit For TC electrodes

D280 Membraning kit For TC pO2/pCO2 electrode

Unassembled connector kit For hyperbaric chamber

Connector kit For ETC hyperbaric chamber

Contact Liquid 4 x 20 mL.

Passthrough cable, For TC electrodes, 6 m

TinyTeddy tcpO2/tcpCO2 membraning kit

TinyTeddy Fixation kit, fixation rings for TinyTeddy, 4 x 25 pcs. + contact solution

Electrolyte for tc sensor 54

Membraning kit for tc sensor 54, 12 preparators, 1x electrolyte 10 ml.

Electrolyte for tc sensor 84

Membraning kit for tc sensor 84, 12 preparators, 1x electrolyte 10 ml.

Adhesive rings N20 kit, dispenser incl. 1 roll of 250 adhesive rings 20 mm, 1x vial contact gel

Fixation kit N20, dispenser incl. 1 roll of 60 fixation rings 20 mm, 1xvial contact gel

E5280-0, TC pO2/pCO2 electrode for TCM3/4

E5250-0 TC pO2 electrode

E5260 Single pCO2 electrode

TinyTeddy tcpO2/tcpCO2 electrode

tc Sensor 54, pCO2

tc Sensor 84, pCO2/pO2

Calibration Gas 2 standard 1 Litre, 10% CO2, balance: N2

TCM4 CAL GAS

The Calibration Gas serves as calibration gas for the Sentec transcutaneous sensors that monitor tcPCO2 and/or tcPO2 (V-Sign™ Sensor 2 and OxiVenT™ Sensor).The Calibration Gas is for use only with the Docking Station integrated in the tCOM+.

The Sentec patient monitor, model tCOM+, is a portable stand-alone patient monitor indicated for continuous, non-invasive patient monitoring of carbon dioxide partial pressure (PCO2), oxygen partial pressure (PO2), functional oxygen saturation (SpO2) and pulse rate (PR), using either:• a single, digital sensor (V-Sign™ Sensor 2) for PCO2, SpO2 and PR measurement, OR• a single, digital sensor (OxiVenT™ Sensor) for PCO2, PO2, SpO2 and PR measurementPO2 measurement with tCOM+ is only possible when used in combination with an OxiVenT™ Sensor.

The Sensor Adapter Cable is required to connect digital Sentec sensors (V-Sign™ Sensor 2, OxiVenT™ Sensor) to the Sentec tCOM+. The cable is available in different lengths: Regular, Long, Extra Long.

The Sensor Adapter Cable is required to connect digital Sentec sensors (V-Sign™ Sensor 2, OxiVenT™ Sensor) to the Sentec tCOM+. The cable is available in different lengths: Regular, Long, Extra Long.

The Sensor Adapter Cable is required to connect digital Sentec sensors (V-Sign™ Sensor 2, OxiVenT™ Sensor) to the Sentec tCOM+. The cable is available in different lengths: Regular, Long, Extra Long.

Sentec’s Non-Adhesive Wrap is intended to be wrapped around the thigh of neonatal patients with very sensitive/fragile skin for subsequent attachment of Sentec Sensors.Sentec’s Non-Adhesive Wrap is a non-adhesive application ring, single-patient use up to 24 hours, recommended for preterm / neonatal patients.